York Wire Company.

Thermal Class:

200°C

MIL

-I-3190

Description:

TURBO™ 117G is comprised of specially formulated high temperature silicone rubber extruded onto premium electrical grade braided fiberglass sleeving. The extrusion process results in a higher density coating that is more homogenous, has better concentricity and yields longer continuous lengths than the typical liquid dipped products common to the industry.

Recommended Use:

TURBO™ 117G is recommended for use in all high voltage/high temperature applications, particularly in power transformers where class H sleeving is required Silicone rubber coated glass sleeving is the only flexible insulating material which remains useful for continuous service in ambient temperatures from -70°C through +200°C.

Physical Properties :

Thermal

TURBO™ 117G is rated Class H by IEEE standards, acceptable for continuous service from -70°C through 200°C. Operation at temperatures up to 315°C is tolerated for short durations. TURBO 117G exceeds all requirements of UL Subject 224 for 200°C, 600 volt operation. It also exceeds the requirements of MIL-I-3190 and ASTM D372.

Environmental

TURBO™ 117G is resistant to moisture, corona, ozone, radiation, compression set, fungus, most chemicals and solvents, weathering, flexure fatigue and heat degradation.

Flammability

TURBO™ 117G burns slowly. The coating maintains its electrical integrity - even under severe fire conditions - by forming a non-conductive ash.

Availability

Sizes

TURBO™ 117G is available in continuous spooled lengths or cut lengths in NEMA sizes # 20 through ¾".

Colors

TURBO™ 117G is available in white, black or iron oxide red. Other colors may be available subject to minimum order quantities and/or setup charges.

Product Number	Dielectric Strength
TURBO 117G-10KV	10 KV
TURBO 117G-15KV	15KV
TURBO 117G-20KV	20KV
TURBO 117G-25KV	25KV