Turbo™ 117F Flame Retardant Silicone Rubber Extruded Fiberglass Sleeving
					- Thermal Class:
 - 200°C
 
- NEMA:
 - TS-1, TYPE 5
 
- MIL
 - -I-3190/6...
 - MIL
 - -P-18057 (grade A)
 
- UL FILE:
 - E123956 & E86619 (grade A)
 
Description:
TURBO™ 117F is used for insulation of leads and connections in electrical and electronic components (transformers, coils, relays, solenoids etc.) where temperature extremes from –70 °C through 200 °C are encountered. Silicone rubber coated glass sleeving is the only flexible insulating material which remains useful for continuous service in ambient temperatures from -70 °C through +200 °C.
Recommended Use:
TURBO™ 117F is used for insulation of leads and connections in electrical and electronic components (transformers, coils, relays, solenoids etc.) where temperature extremes from –70 °C through 200 °C are encountered. Silicone rubber coated glass sleeving is the only flexible insulating material which remains useful for continuous service in ambient temperatures from -70 °C through +200 °C.
Physical Properties:
Thermal
TURBO™ 117F is rated Class H by IEEE standards, acceptable for continuous service from -70 °C through 200 °C. Operation at temperatures up to 315 °C is tolerated for short durations. TURBO™ 117F exceeds all requirements of UL Subject 224 for 200 °C, 600-volt operation. It also exceeds the requirements of MIL-I-3190, MIL-P-18057, and ASTM D372.
Environmental
TURBO™ 117F is resistant to moisture, corona, ozone, radiation, compression set, fungus, most chemicals and solvents, weathering, flexure fatigue and heat degradation.
Flammability
TURBO™ 117F burns slowly. The coating maintains its electrical integrity - even under severe fire conditions - by forming a non-conductive ash.
Availability
Sizes
TURBO™ 117F is available in continuous spooled lengths or cut lengths in NEMA sizes #20 through ¾".
Colors
TURBO™ 117F is available in white, black and iron oxide red. Other colors may be available subject to minimum order quantities and/or setup charges.
|  Dielectric Grade  | 
							Min. Ave. Breakdown  | 
							Min. Indiv. | 
|---|---|---|
| A | 7000 | 6000 | 
| B | 4000 | 2500 | 
| C-1 | 2500 | 1500 | 
Search Our Site
Other Electrical Sleeving
- 210C Heat Treated Fiberglass Sleeving
 - 310B Vinyl Coated Fiberglass Sleeving
 - 400F Series Acrylic Fiberglass Sleeving
 - TURBO™ 117E Silicone Rubber Extruded Fiberglass Sleeving
 - TURBO™ 117F Flame Retardant Silicone Rubber Extruded Fiberglass Sleeving
 - TURBO™ 117G High Voltage Silicone Rubber Extruded Fiberglass Sleeving
 - TURBO™ 117U Silicone Rubber Tubing
 - 540R Silicone Rubber Coated Fiberglass Sleeving
 - 547R Superstretch
 - 710C Saturated Fiberglass Sleeving
 - 900 Braided Pet Monofilament Sleeving
 - 920 Braided Fire Retardant Pet Monofilament Sleeving
 - 930 Braided High Temperature Halar™ Monofilament Sleeving
 
